Toro Z Master Professional 5000 Series Operator's Manual page 2

Riding mower with 60in turboforce side discharge mower
Hide thumbs Also See for Z Master Professional 5000 Series:
Table of Contents

Advertisement

This spark ignition system complies with Canadian
ICES-002
Because in some areas there are local, state, or
federal regulations requiring that a spark arrester be
used on the engine of this machine, a spark arrester is
available as an option. If you require a spark arrestor,
contact your Authorized Toro Dealer.
Genuine Toro spark arresters are approved by the
USDA Forestry Service.
Note:
It is a violation of California Public Resource
Code Section 4442 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land without a spark arrester muffler maintained in
working order, or the engine constricted, equipped,
and maintained for the prevention of fire. Other states
or federal areas may have similar laws.
The enclosed Engine Owner's Manual is
supplied for information regarding the US
Environmental Protection Agency (EPA) and
the California Emission Control Regulation of
emission systems, maintenance, and warranty.
Replacements may be ordered through the engine
manufacturer.
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This rotary-blade, riding lawn mower is intended to be
used by residential homeowners or professional, hired
operators. It is designed primarily for cutting grass on
well-maintained lawns on residential or commercial
properties. It is not designed for cutting brush or for
agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
for product safety and operation training material,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
Figure 1
Figure 1
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g027332
g000502

Advertisement

Table of Contents
loading

This manual is also suitable for:

74915

Table of Contents