Advertisement
WALL MOUNT INSTALLATION
WARNING
1. ALL ELECTRICAL WORK MUST BE DONE IN ACCORDANCE WITH LOCAL OR NATIONAL
ELECTRICAL CODE AS APPLICABLE. FOR SAFETY, THIS PRODUCT MUST BE GROUNDED. IF
YOU ARE UNFAMILIAR WITH METHODS OF INSTALLING ELECTRICAL WIRING, SECURE THE
SERVICES OF A QUALIFIED ELECTRICIAN.
2. WHEN WIRING, SERVICING OR CLEANING THIS UNIT, TURN OFF POWER AND LOCK OUT
SERVICE PANEL. FAILURE TO DO SO COULD ALLOW OTHERS TO TURN ON POWER UNEX-
PECTEDLY WHICH MAY CAUSE FATAL ELECTRICAL SHOCK.
3. TO AVOID ELECTRICAL SHOCK:
• DO NOT INSTALL GENERATOR IN A TUB OR SHOWER ENCLOSURE OR ANY
LOCATION WHERE IT MAY COME IN CONTACT WITH WATER.
• NEVER PLACE A SWITCH WHERE IT CAN BE REACHED FROM A TUB OR SHOWER.
4. DO NOT INSTALL THIS GENERATOR IN AN AREA WHERE CHEMICALS OR OTHER FLAM-
MABLES ARE STORED OR USED. EXPLOSION AND FIRE MAY RESULT.
CAUTION
1. Install Hydroxyl Generator at least 6" from floor or any adjacent vertical surface.
2. DO NOT locate Hydroxyl Generator behind a door, furniture, drapes, etc., where the air flow to the
unit would be restricted.
3. DO NOT CONNECT HYDROXYL GENERATOR TO DIMMER SWITCH OR SPEED CONTROL.
4. Please read specification label on product for further information and requirements.
PLAN THE INSTALLATION
1. Carefully unpack Slimline and remove from plastic.
2. Remove ON/OFF knob by loosening the two allan (Hex) key set screws using the supplied 0.05
inch hex key.
5
Advertisement
