Sony PCS-G50 Manual page 7

Starting a videoconference in the boardroom

Hide thumbs Also See for PCS-G50:

Connecting a Laptop to a Projection Unit

Turn the projection unit on and check it is on "computer" input by pressing the "source" button on the remote.

Connect the laptop to the projector with the VGA cable or by docking the unit.

Turn the laptop on - the computer should automatically sense it is hooked up to the projector and your screen resolution may

change.

If you don't see the image on the screen, you may have to change the settings on the computer to output the image at the correct

resolution.

1. Right Click on

the desktop

3. Select " Output To

Dual Display Clone"

You should now see your image on the screen.

If you do not see your image, press "Fn" + "F8" at the same time to scroll thru the display options of displaying the image on just the

laptop, just the projector, or both.

If you don't see the image (get sync error) or if you see the image, but the ratio is off or the image does not fill the screen, you may

have to do a couple of more adjustments:

1. Right Click on

the desktop & se-

lect " Graphic

Properties"

3. Select " Aspect

Ratio Options"

If you still do not see the image, call Media Services (623-0503) or the help desk (627-8519).

2. Select " Graphics

Options"

4. Select " Notebook +

Monitor"

2. Select " Display Set-

tings" and change to

"1024x768"

4. Select "Full

Screen ", select " OK",

then click on " Apply".

You should see the

image full screen.

Page 7