1. Manuals
  2. Brands
  3. V-TAC Manuals
  4. Fan
  5. VT-6042-4
  6. Instruction manual

V-TAC VT-6042-4 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CAUTION
• The product must only be installed by an authorized electrician and in compliance with local,
regional and state electricity regulations.
• Check if the electricity specification of this device are compatible with your installation.
• Turn off the power before installing or repairing the fan.
• The fan must be properly grounded to avoid the risk of electric shock.
• Use and unauthorized technical modifications could suppose a risk of injury.
• Should be 220V as per the specifications.
• Do not connect the fan motor to a current dimmer. It could give unsatisfactory performance
(engine humming) and cause engine damage.
• Be careful while working near the spinning blades.
• The fan must be installed so that the blades are at least 2, 3 meters above the ground.
• The fan must be hung from a structure capable of supporting a weight of at least 50 kg. The
fixture must be able to support the weight of the fan in motion and should not wobble or
loosen.
• Make sure that the blades do not come in contact with any object at the installation site.
Always leave a minimum clearance of 50cm from the tip of the blades to the wall or ceiling.
• Keep in mind that the larger the space, the better the fan's air flow will be.
• This device is designed for indoor use only. Do not use in an open space or where it may be
exposed to water or moisture.
• Never install the appliance in a room with a high degree of humidity.
• The fan must not be started in a room with a gas appliance running at the same time.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VT-6042-4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for V-TAC VT-6042-4

Summary of Contents for V-TAC VT-6042-4

  • Page 1 CAUTION • The product must only be installed by an authorized electrician and in compliance with local, regional and state electricity regulations. • Check if the electricity specification of this device are compatible with your installation. • Turn off the power before installing or repairing the fan. •...
  • Page 2 • The appliance is not intended to be used by children under the age of 8. It can be used by children over the age of 8, as long as they are given continuous supervision. • This appliance is not intended to be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance in a safe way by a person responsible for their safety, and understand the hazards involved.

  • Page 3: Introduction & Warranty

    INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.

  • Page 4: Technical Data

    TECHNICAL DATA 1) 42" (107CM ) Decorative ceiling fan INSTRUCTION MANUAL 2) With forward and reverse function DECORATIVE CEILING FANS (VT-6042-4) 3) 4 MDF blades with cane and double color 4) Powerful Motor:153*10mm, 2.3kg 5) Revolutions per minute: 220±10 RPM 6) Blade angle 12°...

  • Page 5: Before Installation

    BEFORE INSTALLATION • Open the box avoiding the use of blades or “cutters” to avoid scratching the fan components. • Unpack the parts and handle them carefully so that they do not bend or scratch, and place the motor on a cloth or a soft surface to prevent damage (You can also use the anti-shock foam on the box for this purpose).

  • Page 6: Maintenance

    1. THE FAN MAKES EXCESSIVE NOISE WHILE ROTATING • Allow a slight separation between the canopy and the ceiling, preventing them from touching directly. • Check that the fixing screws of the blades, the fixing screw to the roof, the stem and fasting elements are correctly tightened.
  • Page 7 • Clean the appliance regularly to maintain its appearance as new. To do this, use a soft lint free cloth to avoid scratching the finish. Never use water because it could be damage the motor of the wood of the blades.
  • Page 8 3. Check the correct balance 2. Find the equilibrium point Glue the counterweight to the Place the clip on the blade height of the clip on the sur- you have previously face of the blade. Remove the selected and try the best clip, and turn on the fan.
  • Page 9 STEP 3 STEP 4 LIGHT FAN STEP 5 STEP 6...
  • Page 10 BLADES IF THEY ARE BALANCED In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B...

Table of Contents