Advertisement
FIT AND SECURE
2
2.4
2.5
2.6
11
RRAC148_REV_A01
4
12
13
14
15
13mm
5
6
7
8
4mm
10mm
4
To set the Rear Wheel holder, place your bike
back onto the Bike Carrier and secure the
front wheel.
Refer to Step 2.2.
Mount the Rear Wheel Holder (Item 4) by
sliding two M8 x 20 Hex Bolts (Item 8) into
the slat closest to the center of the rear
wheel.
The Rear Wheel Holder can be orientated
backward or forward on the Rack to best
suite your bike.
Secure the Rear Wheel Holder using two
M8 x 16 x 1.6SS Flat Washers and two M8
Nyloc Nuts (Items 6 & 7) as shown.
Finish off by placing M8 Nut Caps over the
Nyloc Nuts.
Secure the rear wheel by feeding the
ratcheting strap over the rim and into the
ratchet buckle.
If the Strap needs to be lengthened, use the
Angle Bracket (Item 13).
Loosen the Strap and secure the Angle
Bracket to the Rear Wheel Mount Bracket
(Item 4) using the existing fasteners.
Secure the Strap to the Angle Bracket
using an M6 x 16 Button Head, M6 x 12 x
1SS Flat Washers and M6 Nyloc Nut.
(Items 11, 12 & 14).
Place an M6 Nut Cap (Item 15) on the M6
Nyloc Nut.
© 2018 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
