Advertisement
DORVT22
WiFi App Connection Guide
Please See Dorani Touch Installation Manual for Wiring and Installation
The Monitor MUST be installed in a location with GOOD WiFi signal, low WiFi signal can cause poor
or unstable connections.
Locate the monitor as close to the WiFi router/modem as possible
Once you have the system operational as a standard intercom please follow the steps to get the
system operational to your mobile device.
Step 1 – Connect to the Internet
1 - Tap the Screen to reveal ALL Icons as below
3. Ensure Wifi Switch
2 . Press WiFi Symbol
is ON
4. Press Wlan Setting
Advertisement
Table of Contents
Related Manuals for Dorani Limited DORVT22
Summary of Contents for Dorani Limited DORVT22
- Page 1 DORVT22 WiFi App Connection Guide Please See Dorani Touch Installation Manual for Wiring and Installation The Monitor MUST be installed in a location with GOOD WiFi signal, low WiFi signal can cause poor or unstable connections. Locate the monitor as close to the WiFi router/modem as possible Once you have the system operational as a standard intercom please follow the steps to get the system operational to your mobile device.
- Page 2 5. Select Desired Network 6. Input Password and ENTER 7. Press Connect/Disconnect – Wait for Connection and it will automatically go back to WiFi menu 8. Press SIP Config These Settings you will later enter into the APP, or use the QR code for quick connection Press Right Hand...
- Page 3 Press Manual Register (This is used to clear the server data) Download the 2-Easy App from the Apple App Store or Google Playstore...
- Page 4 Once You have Downloaded Open the Application Select Assistant Select 3 Dashes for Menu Option 1 Select Scan Button and Scan QR Code Option 2 Enter Details manually into Press SAVE...
- Page 5 This registered should go green as registered THIS MAY TAKE UP TO 3 MINUTES YOU SHOULD NOW BE READY TO TEST SETTING UP FOR DIVERT The system has 3 different mode operations 1) Normal = No Diversion to Mobile Device 2) Divert if Not Answered = Divert after time (default 20 Seconds) 3) Divert Always = Instant Divert (no internal monitor ringing) NOTE: Once Diversion takes place –...
- Page 6 Adjusting Diversion Time and Video Resolution Select Settings Select Install Settings Divert Time = Time until diversion Select System Settings in Call if not answered – Adjust Password: 12345678 accordingly Right Hand Arrow for Next Divert Video Res = Quality of Video 0,1,2,3 Page for diversion.
- Page 7 TROUBLE SHOOTING Once you have scanned and Saved the information Change the following Settings Turn Allow IPV6 to OFF Press Menu Press Menu Press Network Press Settings Button Then go BACK Press Account Turn ON MORE Turn Push Options Detail Button Notifications ON NOTE: If you save go back to the assistant and modify the account these settings will need to be changed again.
Need help?
Do you have a question about the DORVT22 and is the answer not in the manual?
Questions and answers