3.
Figure 55
Figure 55.
4.
1
Note: The
/
" spacing is ideal, although with
16
larger blades it may not be possible. In such
cases, adjust the guide bearings as far for-
ward as possible to the blade gullets, and still
maintain the proper support bearing spacing
adjustment.
Figure 56.
5.
6.
7.
8.
9.
Figure 56
Make sure that the blade teeth will not con-
tact the guide bearings when the blade is
against the rear support bearing during the
cut or the blade teeth will be damaged.
0.004" is approximately the thickness of a
dollar bill.
Whenever changing a blade or adjusting
tension and tracking, the upper and lower
blade support bearings and guide bearings
must be properly adjusted before cutting
operations.
Note: