Control4 Integration - Axis Gear Manual

Control4 Integration

Before you begin, please make sure that:
- All Gears are in Smart Home Mode
- You have Composer Pro Software installed
ADD DRIVER TO SYSTEM
This driver is designed for AXIS Gear. The driver provides 2-way communication between the
Director and the Gear so that all events are updated real time. The functions of this driver
include the following:
- Open
- Close
- Set Blind to Discrete Level
- Stop
Group functionality can be implemented via the TEMP_LEVEL attribute which is described in
the Group Control section of the documentation.
1. In the menu bar, go to ​ D river > Add or Update Existing Driver​ to make the driver available
to Composer
2. Go to ​ S ystem Design
3. Under the ​ I tems​ section, go to ​ M y Drivers​ and right-click on the desired folder (or create a
new one) and click on ​ A dd Driver
4. Select ​ B linds​ as the Device Type and select ​ A XIS Gear​ . It should now appear in My Drivers
5. Double click on the Driver to add it to the System (NOTE: Do this step for every Gear that
needs to be added)
JOIN GEAR TO SYSTEM
1. Go to ​ C onnections​ and go to the ​ N etwork​ tab
2. Click on ​ Z igBee Network​ to show the ZigBee device and available drivers
3. Enable joining of devices by using any of the following methods and select the appropriate
ZigBee server:
- Double Click on the Driver
- Right Click on the Driver and select Identify
- Select Driver and click Identify and press ​ N ext >​ until you reach the Driver
4. Long Press the Pair button on the Gear and wait until the EUI of the ZigBee device is
populated as the Address
GROUP CONTROL