Axis Gear Manual page 38

2.​ This phase tests for several additional potential faults and statuses. Once the LEDs are
purple, press the power button followed by every position on the Touch Strip. Alternatively, you
may slowly slide your finger down the Touch Strip.
Once all buttons have been pressed, the Touch Strip will display a color pattern. These colors
signify the health of Gear and could help troubleshoot some issues.
LED Position and Color
(Starting from the top of the Touch Strip)
1. Green/Red
2. Blue
3. Green/Red
4. Blue
5. Green/Red
6. Blue
7. Green/Red
8. Blue
9. Green/Red
10. Blue
Meaning
LiPo battery status (internal battery)
Red signifies under 25% LiPo charge
If Red, deep charge Gear
This is static
Alkaline battery status (AA batteries in Solar
Bar)
Green = over 75%
Orange = 25% to 75%
Red - under 25%
If Gear is plugged into the Power Adapter,
this will always be Orange
This is static
Motor
Red signifies potential fault
This test is only accurate when performed
while ​ n ot ​ attached to a shade cord. If
attached, Red will always be the result.
This is static
Solar Panel test
Red is normal, Green will appear only on an
exceptionally sunny day
This is static
Capacitive Touch Strip
If Red, attempt test once more
If Red persists, this may be a fault with the
Touch Strip as it does not recognize certain
presses
This is static