Amazon Echo Plus
Important: Direct integration only works with Echo Plus and Echo Show. Other products in the
Amazon Echo line are not compatible with AXIS Gear.
Before you begin, please make sure that:
- Gear is configured and put into Smart Home Mode
- Echo Plus is set up and configured
- The Amazon Alexa App is set up on your mobile device
JOIN GEAR TO AMAZON ECHO PLUS
1. Open the A mazon Alexa app and navigate to S mart Home
2. Mark your Echo Plus 'discoverable':
a. Say "Alexa, discover devices," OR
b. Go to the S mart Home section and click on the + icon > Add Device
3. Immediately press P air on your AXIS Gear. Echo Plus will discover AXIS Gear as 'First
Device' (or Second, or Third).
The touch strip flashes green twice to indicate a successful pairing
To verify, go to All Devices in the Devices screen. The Gear will appear as 'First Device' (or
Second, or Third)]
VOICE COMMANDS
1. In the D evices screen click on the + icon in the top right corner
2. Select A dd Group and choose a room name
3. Select the Gears that will be part of the group
4. Now you can use the following commands which Alexa can process:
"Set [room] to ___%" - all blinds go to desired percentage
NOTE: You may also control each device by using the name given to the device. For example,
"Set First Device to 50%"
SCHEDULES
1. Go to R outine > Add Routine
2. Select S chedule under W hen this happens and set a time, press N ext
3. Select S mart Home , select S mart Home , select C ontrol Device , select the device
4. Select B rightness and set a value anywhere between 0% and 100% (0% is close, 100% is
open)