On-Device Buttons - Axis Gear Manual

On-Device Buttons

There are 3 physical buttons on the top of the device ​ S ET, GROUP​ and ​ P AIR​ , and an LED
capacitive touch interface on the front of the device.
Each physical button press creates a different outcome, along with combination button presses
such as Group+Pair.
Use the Set, Group, and Pair buttons for setup and diagnostics features. There is a further
chapter on these buttons.
The touch interface consists of a ​ P OWER​ button near the top (signified by the AXIS logo) and a
series of ​ L ED CAPACITIVE TOUCH BUTTONS​ positioned on the​ TOUCH STRIP​ .
The Power button turns Gear on and off or stops operation, while the touch strip is used to
control the shade.
To turn Gear on or off, touch and hold the Power button for five seconds or until the Touch Strip
lights up. While Gear is in operation, tap the Power button to cease movement.
Pressing the top of the Touch Strip opens the shade to the fully opened position and pressing
the bottom of the touch strip moves the shade to the fully closed position. You can move the
shade to 25%, 50%, and 75% positions by touching the Touch Strip in-between the opened and
closed positions.