HP EliteBook x360 830 G7 Product End-Of-Life Disassembly Instructions page 2

Item Description
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing refractory
ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
#1 screwdriver
T5 screwdriver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
Follow steps described in Disassembly instruction (file attached)
1.
If parts can be removed without using a tool, remove it first
2.
Use correct screwdriver and torque value before unlock the screw.
3.
4.
5.
6.
7.
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
HPI instructions for this template are available at EL-MF877-01
Quantity of
items
included in
product
Tool Size (if
applicable)
Electric cross
screwdriver
Electric cross
screwdriver
Page 2