Table of Contents
Advertisement
1.8 CE mark
The CE mark indicates compliance with the provisions of the Machine Directive, Low Voltage Directive,
EMC Directive and PED. Since this concerns an unfinished machine, it is not possible to meet all the
provisions and essential safety on delivery of the machine. A list may be requested from the supplier.
The CE mark is located on the sticker on the lantern piece.
In accordance with the Low Voltage Directive, the HD pump is classified as a Class I device.
1.9 Residual risks
It is neither practically nor economically feasible to eliminate 100% of all risks. In addition, risks
associated with the machine are closely linked to what the machine does. These residual risks are
listed below in a table. It is important that the user is aware of the fact that there are risks associated
with the use of this machine. Observe safety precautions to the full to minimise any risk.
Risk page No.
Definition of residual risk
1.
Flexible hoses age due to external influences,
and can tear or burst as a result.
2.
A hazard arises because the pipework is not
connected properly by a competent person.
Table 5 List of residual risks
1
The aim is to reduce all risks to level A. However, this may not be possible because of what the machine does or
practical or economic considerations.
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · info@vanderendegroep.nl · www.vanderendegroep.nl
Pagina 8 van 21
Van der Ende Groep · Aartsdijkweg 23, 2676 LE, Maasdijk · Telefoon 0174 515050
Risk factor
1
Category
3
A
4
A
Advertisement
Table of Contents
