Table of Contents
Advertisement
Attaching the Mounting Plate
Step 1
1) Use four M10 hex head bolts, eight M10 flat washers, and four M10 nuts to attach the mounting plate to the ceiling
adapter.
At this time, finger tighten all hardware.
*Mount shown for illustration purposes only (not included)
Step 2
A 17mm open-end wrench and a 17mm socket wrench will be required to perform the following step
(not included).
1) Once the two units have been attached together, use a 17mm socket wrench and a 17mm wrench to tighten the
M10 hardware.
*Mount shown for illustration purposes only (not included)
Page 18
Visit the ViewZ website at http://www.viewzusa.com
VZ-CMK04
Installation Instructions
Advertisement
Table of Contents
