Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ViewZ VZ-CMK01
Summary of Contents for ViewZ VZ-CMK01
-
Page 1: Installation Instructions
INSTALLATION INSTRUCTIONS VZ-CMK01 Ceiling Mount Kit for 8” to 32” ViewZ Monitors NORTH AMERICA 177 W. Orangethorpe Ave Placentia, CA 92870 USA USA and Canada Phone: 1-888-99-ViewZ Other Locations Phone: (001) 714-996-1177 Fax: (001) 714-996-1138 853177002861... -
Page 2: Table Of Contents
PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY. VIEWZ DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY VIEWZ PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS... -
Page 3: Installation Tools
Phillips Tip Screwdriver Socket Wrench Ladder Parts List Make sure your ViewZ product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call ViewZ at (888) 99-ViewZ. VZ-CMK01 Mount Hardware VZ-CMK01A... -
Page 4: Mounting Hardware
M6 x 16mm Screw M4 x 10mm Screw (Qty 4) (Qty 4) M6 x 20mm Screw (Qty 4) M6 x 30mm Screw (Qty 4) M6 x 45mm Screw (Qty 4) Page 4 Installation Instructions Visit the ViewZ website at http://www.viewzusa.com... -
Page 5: Features
VZ-CMK01 Features Extendable The VZ-CMK01A may be attached to 1-½˝ standard threaded pipe (NPT), or one of ViewZ adjustable- height ceiling adapters. Please refer to the installation instructions that come with these adapters. Radial Glide® 360° rotation and 15° of... -
Page 6: Installing The Vz-Cmk01A Mount
Please read these installation instructions once thoroughly before attempting to install your ViewZ product. The VZ-CMK01A may be attached to 1-½˝ standard threaded pipe (NPT), or one of ViewZ adjustable-height ceiling adapters. Please refer to the installation instructions that come with these adapters. -
Page 7: Mounting Hardware
Any obstruction near the mounting point? If Yes, you must install Universal Spacers. Proceed to the “Universal Spacer Installation” section. If No, skip to the “VZ-AP200 Adapter Plate Installation” section. Installation Instructions Page 7 Visit the ViewZ website at http://www.viewzusa.com... -
Page 8: Universal Spacer Installation
...and you selected M5 screws from the “Selecting the Mounting Hardware” section, you must also use M5 flat washers. Proceed to the “Attaching the Flat Panel to the Mount” section. Page 8 Installation Instructions Visit the ViewZ website at http://www.viewzusa.com... -
Page 9: Attaching The Flat Panel To The Vz-Cmk01A Mount
M4 x 10mm Screw M4 x 5mm Screw VZ-CMK01A Mount Thread Insert in Flat Panel or Adapter Plate Keyhole Slot M4 Screw Partially Threaded Into Flat Panel or Adapter Plate Installation Instructions Page 9 Visit the ViewZ website at http://www.viewzusa.com... -
Page 10: Adjusting The Mount Tension
C: 200mm x 100mm mounting points. (M4 x 10mm Phillips flat head screws only) D: 200mm x 200mm mounting points. (If M4 screws are used, M5 washers must be used as well) Page 10 Installation Instructions Visit the ViewZ website at http://www.viewzusa.com... -
Page 11: Vz-Cmk01B Instructions
2) Use a Phillips screw driver to tighten down the pre- installed M6 x 12mm locking screw to secure the 1.5" NPT pipe to the VZ-CMK01B. Bolt Washer Commercially Available Ceiling Hardware Washer Locking M6 x 12mm Phillips Screw Installation Instructions Page 11 Visit the ViewZ website at http://www.viewzusa.com... -
Page 12: Warranty
What ViewZ Will Do At the sole option of ViewZ, ViewZ will repair or replace any product or product part that is defective. If ViewZ chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.
Need help?
Do you have a question about the VZ-CMK01 and is the answer not in the manual?
Questions and answers