TYAN S1572 ATX User Manual page 26

w Virus warning
This category flashes on screen. During and after the system boot up,
any attempt to write to the boot sector or the partition table of the hard
disk drive will halt the system and the following error message will
appear. In the meantime, you can run an anti-virus program to locate the
problem. Default value is Enabled.
"Attempting to write to boot sector, continue? Y/N"
Enabled Activate automatically when the system boots up causing a warning
message to appear when anything attemps to access the boot sector or hard
disk partition table.
Disabled No warning message to appear when anything attemps to access the boot
sector or hard disk partition table.
w CPU Internal Cache/External Cache
These two categories speed up the memory access. However, it de-
pends on the CPU/Chipset design. Default value is Enabled.
Enabled Enables the cache
Disabled Disables the cache
w Boot Sequence
This category determines which drive the computer searches first for the
disk operating system (i.e. DOS). Default value is A,C.
A,C System will first search for floppy disk drive then hard disk drive.
C,A System will first search for hard disk drive then floppy disk drive
w Swap Floppy Drive
Default value is Disabled
Enabled Floppy A & B will be swapped under DOS
Disable Floppy A & B will be normal definition.
S1572-001-01 http://www.tyan.com 26