Table of Contents
Advertisement
Chapter 3
Onboard Resource Settings
Q: Does my operating system support AGP?
A: Currently, only Windows 98 and Windows NT 5.0 will have built-in support
for AGP. Some AGP cards require Windows 95 OSR2.1 or a special driver from
Intel. Please check with your graphics vendor for more details.
Q: Will my motherboard run a PII/Celeron/Mendicino CPU?
A:Yes, the BIOS version 1.07 supports Celeron 266-300MHz and the BIOS
version 1.12 supports the Celeron-A (Mendocino) 300-333MHz.
Q: Can I run dual Celeron/Mendocino CPU´s on this motherboard?
A: No, both Celeron and Mendocino CPU's are not designed to function in
dual CPU mode even on a dual slot motherboard.
Q: My system will not turn off - why?
A: The power button is designed to turn off the system ONLY when you
press/hold the power button for more than 5 seconds. BIOS version 1.12 will
provide an option for instant power-off .
Q: When I clear the BIOS with the jumper, it does not clear - why?
A: In most cases, BIOS can be cleared by inserting jumper JP3 to the 2-3
position. In some cases, certain brands of power supply need to be UN-
PLUGGED from a power source in order to clear the BIOS using jumper JP3.
Q: I´m getting a "motherboard resource conflict" - seen in Win95/98 Device
Manager as a yellow Exclamation Mark image. How do I clear it up?
A: More than likely, you have BIOS version 1.03. You need to install BIOS
version 1.07 to resolve this problem.
Q: My Wake-On LAN network burned out my power supply. What should I
do?
A: You need to use a power supply with 800ma at +5VSB power line. This is
because most Wake-On LAN network cards require +5V 750 mA in sleep mode.
We recommend our customer to purchase the ATX power supply with mini-
mum 800 mA at +5V SB output to avoid over-current damage to the power
supply.
Q: How can I disable the keyboard detection in the BIOS v.1.12?
A: You need to enable the Quick Boot option in CMOS - then the BIOS will not
check for a keyboard.
36
http://www.tyan.com
Advertisement
Table of Contents
