GE C-Start Installation Manual page 15

Light ring will continuously flash blue until the switch is added to
the C by GE app.
Light ring will flash red if the circuit is overloaded.
Max load rating 150W LED and 450W incandescent/halogen.
Light ring will not illuminate if wired incorrectly.
IF LIGHTS DON'T TURN ON:
1. Check that air gap switch is depressed.
2. Check that power to the switch is on at the breaker.
3. Turn power off at the breaker, return to the switch to confirm the wires are
securely and properly wired according to the installation guide.
4. Go to cbyge.com/switch-support for more troubleshooting.
Depressed,
socket powered
Pulled out,
no power to socket