How To Control Your Tv Using Your Bt Tv Remote - BT DB-T2200 User Manual

How to control your TV using your BT TV remote

You can set your BT TV remote to control both your
BT TV box and your TV. Here's how.
1 Turn on your TV, then look up the four-digit code for your brand of TV
(see the table on the right). Then hold down
blue light on the remote flashes three times.
2 When the flashing stops, enter your code. The blue light will flash
another three times.
3 Hold down until your TV turns off. The blue light will blink while
it turns off.
4 When your TV turns off, let go of
should turn back on. Next try Vol
For some TV brands, you need to press
not working, try this step again but press
5 If the volume control works, press
If it doesn't work, start again from Step 3.
Using your remote to switch to another device
When switching to another device on your TV (like a games console),
press on your remote, then keep pressing
down arrows) to scroll through your choices (like HDMI1).
Maximum volume too low?
If you need to change the volume on your BT TV box after setting up
your remote, hold down
AD
and until the
and press it again – your TV
, Vol .
instead of . So if it's
.
. And that's it!
(not the up or
while pressing Vol , Vol .
TV brand Code
Goodmans 2037
Hitachi 2424
JVC 2788
LG 2992
Panasonic 3846
Philips 3951
Samsung 4483
Sharp 4848
Sony 4985
Toshiba
5523
If your make of TV isn't listed here, you
can find a full list of brands and codes at
bt.com/help/remote
Once you've set up your remote,
you can:
• turn your TV on and off (standby)
• switch to another device
• adjust or mute the volume.
Need some help?
15