Advertisement
Mounting
4.
Mounting the Temperature Probe Sensor
Select a suitable mounting site.
-
Mounting the sensor to a pipe will require a probe clip kit
-
Honeywell Elm SF0120.
Refer to Honeywell document ZD56037UK07R20801 for probe
-
and technical data.
Prepare the cables to the required length.
-
Connect sensor to Transmitter connector as section 3.
-
5.
Teach-In
Refer to SmartEye Receiver Installation Instructions before installing
the Receiver.
5.1 First time installation requires the R eceiver to be defaulted.
Whilst holding down the button on the Receiver, power it up.
Keep the button depressed until 'dE
5.2 Press Receiver button again until ' T EACH' appears in the
upper middle of the display and 1 on the right hand side.
Release button
10
F
' appears on LCD display.
Advertisement
