IC7.9 ASSEMBLY STEP 5
85
A
B
C
D
16
A
Carefully attach the UPPER CONSOLE CABLE
(A) to the LOWER CONSOLE CABLE (B) pre-
assembled to the handlebar.
B
Carefully attach the MAST CABLE (C) to the
FRAME CABLE (D) pre-assembled in the frame.
C
Adjust console to preferred viewing angle.
NOTE: Check to see there is no loose cable that could
make contact with the flywheel once the cable harness
is assembled. Tuck away any loose cable.
D
Congratulations, you have successfully assembled
the Indoor Cycle.
CONSOLE OPERATION
17