GIGA-TMS MSR120 Series User Manual page 19

Demo Software
Write Card - Step 3: Select Auto Next after Write
The default setting of the [Auto Next after Write] check box is checked. User can click [Prev Record] or
[Next Record] to select data that you need. Also, it allows user to uncheck [Auto Next] after write then select
your own data.
Write Card - Step 4: Click [Write Card]
Click [Write Card] button to write card. Click [Cancel] to stop write card function.
Write Card - Step 5: Finish Write Card
Swipe card, If the message is "Write OK", the card has been written successfully. If
the message is "Write Error", Please make sure that you have selected right card type
Hi-Co or Lo-Co.
19