Your Watch; Operating The Crown - Citizen H38 Series Manual

1. Your Watch

iAutomatic reception function: Every morning at 2 a.m. and 4 a.m. the watch
will automatically receive the radio wave and adjust the time.
However, if reception is successful at 2 a.m., automatic reception will not be
performed at 4 a.m.
iOn demand reception function: The radio waves can be received at any time
of the day to adjust the time.
* Not possible when the radio wave is interrupted
iEco-Drive function: This solar powered Eco-Drive watch is equipped with a
solar power function for powering the watch by converting light energy into
electric energy. The watch incorporates a power saving function that reduces the
electrical power consumption when the watch face is not exposed to light.
iTime difference adjustment function: The watch incorporates a convenient
time difference adjustment function (±27 hours).
A simple method is available for changing to the local time if you are going to
an area in a different time zone.
116

2. Operating the Crown

There are two models available for the crown: normal and screw lock.
<Operating the Screw Lock Crown>
• Turn the crown
to the left.
Turn to the left
<Moving the Hands Continuously>
When the crown is pulled out to the position 1
and quickly turned to the left or right (more than 2
clicks), the hands will rotate continuously.
To stop the continuous movement of the hands,
turn the crown to the left or right by one click.
* A gentle "click" can be felt by the fingertips.
Using the side of your finger, quickly
turn the crown by two or more clicks.
• When the screw lock is
released, the crown
pops out a little and
stops in the normal
position. After
finishing the operation,
lock the crown again.
117