Citizen H380 Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
Component identification
Hour hand
Reception result
indication (OK)
Second hand
• Actual appearance may differ from the illustration.
Checking the signal reception result
• This watch receives time signals from the China station every day to adjust time
automatically.
1.
Push in the crown.
2.
Press and release the lower right button
The second hand moves to indicate the result of the last reception.
Indication
OK
The reception was successful.
NO
The reception failed.
• Try signal reception following the steps in
if the last reception failed.
(on-demand reception)
3.
Press and release the lower right button
procedure.
The indication returns to current time.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
Receiving the signal manually (on-demand reception)
• It takes 2-15 minutes to finish reception.
1.
Push in the crown.
2.
Press and hold the lower right button
The second hand points "RX" and signal reception starts. The second hand
returns to normal movement after finishing reception.
Reception was successful The time will be updated.
The time is not corrected and the previously set time
Reception failed
resumes.
• Press and hold button for 2 seconds or more to cancel reception.
A
H380 Abbreviated instruction
Minute hand
Button
B
Crown
Button
A
Reception result
indication (NO)
Reception-in-progress
indication (RX)
.
A
Reception result
Receiving the signal manually
to finish the
A
for 2 seconds or more.
A
H380 instruction manual
Adjusting the time manually
1.
Pull out the crown.
The second hand points 0 second.
2.
Rotate the crown to adjust time.
• When you rotate the crown quickly a few times, the hands will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
3.
Push in the crown in accordance with a reliable time source to
finish the procedure.
Setting the time difference
You can indicate time in a different time zone without adjusting time by setting
time difference.
• You can set time difference in 1-hour increments in the range of ±27 hours.
1.
Push in the crown.
2.
Press and release the upper right button
The second hand shows the time difference currently set.
3.
Rotate the crown to set the time difference.
±0
–5
–10
–27
4.
Press and release the upper right button
procedure.
The time with the time difference set is indicated and the second hand returns
to normal movement.
• The hands return to normal movement automatically in about 60 seconds
without pressing the button.
1/2
.
B
+5
+10
+27
to finish the
B