Citizen H33 Series Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual.
Component identification
Reception-in-progress
indication (RX)
Reception result
indication (NO)
Second hand
Hour hand
• Actual appearance may differ from the illustration.
Checking the signal reception result
• This watch receives the time signal from the Japan station every day to adjust
time automatically.
1.
Push in the crown.
2.
Press and release the lower right button
The second hand moves to indicate the result of the last reception.
Indication
OK The reception was successful.
NO
The reception failed.
OFF
The signal-reception function is deactivated.
• Try signal reception following the steps in
if the last reception failed.
(on-demand reception)
3.
Press and release the lower right button
procedure.
The indication returns to current time.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
H33* Abbreviated instruction
Reception result
indication (OK)
Minute hand
Button
B
Crown
Reception-off
indication (OFF)
Button
A
.
A
Reception result
Receiving the signal manually
to finish the
A
Receiving the signal manually (on-demand reception)
• It takes 2-15 minutes to finish reception.
1.
Push in the crown.
2.
Press and hold the lower right button
The second hand points "RX" and signal reception starts. Release the
button as the second hand points "RX". The second hand returns to normal
movement after finishing reception.
Reception was successful
Reception failed
• Press and hold button
A
Deactivating signal reception
You can turn off signal reception to stop unnecessary time adjustment.
1.
Push in the crown.
2.
Press and hold the lower right button
The second hand points "OFF".
• Do not release the button until the second hand points "OFF". On-demand
reception starts if you release it while the hand points "RX".
3.
Press and release the lower right button
procedure.
The indication returns to current time.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
To activate signal reception again
1.
Push in the crown.
2.
Press and hold the lower right button
The second hand points "RX" and returns to normal movement.
Adjusting the time manually
1.
Pull out the crown.
The second hand points 0 second.
2.
Rotate the crown to adjust time.
• When you rotate the crown quickly a few times, the hands will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
• To adjust the hour faster, see
3.
Push in the crown in accordance with a reliable time source to
finish the procedure.
1/2
for 2 seconds or more.
A
The time will be updated.
The time is not corrected and the previously set time
resumes.
for 2 seconds or more to cancel reception.
for 7 seconds or more.
A
to finish the
A
for 7 seconds or more.
A
Adjusting the hour easily.