Cisco Aironet AIR-ANT5140V-R Manual page 9

Figure 3
Follow these steps to install the antenna on a channel ceiling T-rail.
Identify the location where you intend to install the antenna.
Step 1
Use a pencil to make an index mark at the locations on the T-rail where you will install the channel T-rail
Step 2
adapters.
Note
In the mounting kit, locate two recessed channel ceiling adapters.
Step 3
Step 4 Disassemble each adapter by pushing on its tabs using your thumb and forefinger.
1
78-17605-01
Antenna Installed on a Channel Ceiling T-Rail
These marks indicate the center points of the adapters and must be 10 3/16 in. (24.8 cm) apart.
1
Cisco Aironet 4-dBi Omnidirectional Antenna (AIR-ANT5140V-R)
Installing the Antenna
9