Related Manuals for Techno TH381
Summary of Contents for Techno TH381
- Page 1 Assembly instructions for TH381 Specifications of Torque Forces 16 March 2017 © Techno s.r.l. All rights reserved.
- Page 2 TH381 screw terminals tightening Screw tightening Cable cross-section 0.25 mm – 1.5 mm THB.381.xxx.x max. 0.2 Nm Stranded and solid conductors © Techno Srl All rights reserved.
- Page 3 TH381 cable-to-cable To connect Push the plug connector into the socket connector untill fully seated A noise is the proof of correct matching Apply gentle traction between plug and socket to ensure they are well hooked Note PATENTED HOOKING SYSTEM: maximum pull-out force is 25 Kg ©...
- Page 4 TH381 cable-to-cable To disconnect To disconnect Press the button and pull the plug out from the socket © Techno Srl All rights reserved.
- Page 5 TH381 cable-to-cable Cable gland Cable gland Clockwise - 2.5 Nm Clockwise - 2.5 N xxxxxxx Clockwise - 2.5 Nm Clock xxxxx Code: THx.381.xxx.x Code: THx.381.xxx.x © Techno Srl All rights reserved.
- Page 6 TH381 panel-mounted M11x1 Important In case of circular hole, in order to hold the Code: THx.381.Mxx panel-connector when panel-mounting, you THx.381.Lxx should insert the plug (or socket) connector into the panel-socket (or panel-plug) connector. A specific assembly tool is available starting May ‘17...
- Page 7 TH381 panel-mounted M20 (all panels) Code: THx.381.Nxx THx.381.Pxx Important In case of circular hole, in order to hold the panel-connector when panel- mounting, you should insert the plug (or socket) connector into the panel-socket (or panel-plug) connector. A specific assembly tool is available starting May ‘17...
- Page 8 How to use the quick-fix spanner Bottom Bottom SAME AS THE RIGHT SIDE Code: THx.381.xxx © Techno Srl All rights reserved.
- Page 9 2.0 Nm ÷ 2.5 Nm Important: the cable gland (B) will be tightened automatically when turning the nut (A) Cable retention and IP68 resistance are guaranteed (acc. to EN61984 and EN60998/EN60529) © Techno Srl All rights reserved.