GENUINE PARTS
INSTALLATION INSTRUCTIONS
PACKAGE CONTENTS: SUNSHADE (QTY. 1), STORAGE BAG (QTY. 1), INSTRUCTION SHEET (QTY. 1)
TOOLS REQUIRED:
1
Unfold the Sunshield with the
silver side facing outward and
place it flat onto the dash area.
Then slide it forward until it
reaches the bottom of the wind-
shield.
2
With both hands, lift the top of
the Sunshield into the wind-
shield area. (Be sure not to
bend corners while installing,
or damage to the inner insula-
tor may occur.)
3
Pull down each sun visor to
hold the Sunshield in place.
There is nothing to attach to
your vehicle.
To remove, simply reverse the
steps shown above, fold unit
and store in a suitable location.
NONE
SUNSHADE
SOA3991000 - Legacy/Outback
SOA3991100 - WRX/Sti
SOA3991200 - Forester
SOA3991300 - Impreza
SOA3991400 - Tribeca
SOA3991500 - BRZ
1320081
02/12
Need help?
Do you have a question about the SOA3991000 and is the answer not in the manual?
Questions and answers