Table of Contents
Advertisement
Operation as per destination
Operation modes
Permissible
Operation of the furnace is permitted
operation
modes
This furnace is designed for:
The use of the furnace for other purposes than those referred to in this
document such as processing products other than those fulfilling the
furnace's purpose of design in addition to handling hazardous materials
or harmful substances, is considered as an improper application.
The operator is fully liable for damages resulting there from.
Proper application of the plant includes observation of the procedures
described in these operating instructions during installation,
commissioning, and maintenance.
The furnace corresponds to „protective degree 0", i. e. it must be
operated under supervision. (Please, refer to EN 60519-2:1993).
Only furnaces with a separate over temperature sensor can be
operated without supervision. (Please, refer to EN 60519-2:1993).
Prohibited
Operation of the furnace is not permitted
operation modes
Manipulations
When operating the furnace protective facilities are not allowed to be
removed, by-passed, or shut off.
Otherwise, the plant operator acts on his own responsibility!
after thoroughly reading and fully understanding the operating
instructions. Furthermore, the procedures described in the operating
instructions must be observed.
a furnace temperature of max. 1600°C (HTR.....-.../16), of
max. 1700°C (HTR.....-.../17), von max. 1800°C (HTR.....-.../18).
For nominal values of the plant, please refer to the technical data.
using sources of power, products, operating material, aids, etc. which
are subject to an ordinance on hazardous materials or which affect
the operating personnel's health in any way.
using plant equipment which was modified by the plant operator
Page 5
Advertisement
Table of Contents
