Stihl FS 410 C-M Instruction Manual page 20

English
The following guard rings are mounted
on the gearbox or available as special
accessories:
Guard ring for mowing applications
A limit stop kit, which includes a
deflector, a guard washer and guard ring
for mowing attachments, is available as
a special accessory for mounting brush
knives.
3
2
1
For optimum protection from the ingress
of grass when using mowing
attachments:
Attach the guard ring (1) for mowing
N
applications
Fit the thrust plate (2) and guard
N
washer (3)
18
Guard ring for sawing applications
2
1
For use with circular saw blades
Attach the guard ring (1) for sawing
N
applications
Fit the thrust plate (2)
N
Retaining the Shaft
1
3
2
The output shaft (1) must be blocked
with the stop pin (2) to mount or remove
cutting attachments. The stop pin is
included with the machine and is
available as a special accessory.
Push the stop pin (2) as far as it will
N
go into the hole (3) in the gear –
press gently
Turn the shaft, nut or cutting
N
attachment until the stop pin
engages and the shaft is blocked
Mounting the Cutting Attachment
WARNING
Use a deflector that matches the cutting
attachment – see "Mounting the
Deflector".
Removing and Installing Metal Cutting
Attachments
Before removing and installing metal
cutting attachments:
WARNING
Wear protective gloves to reduce the
risk of direct contact with the sharp
cutting edges.
2
FS 410 C-M K, FS 460 C-M K, FS 490 C-M K