The Remote Control; Setting The Time - Sony CMT-CP100 Operating Instructions Manual

q
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
llOV-120v
iIF!
220%240V
VOLTAGE
SELECTOR
q
Connect the power cord to a wall outlet.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press I/&.
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to prevent possible damage from
battery leakage and corrosion.
1
Turn on the system.
2 Press TIMER SET on the remote.
If you are setting the clock for the first time,
8
z
go to step 5. 3
(0
3 Press t44IHI on the remote
2
repeatedly until "SET CLOCK" appears
in the display.
5
4P
z
ress ENTER on the remote.
The hour indication flashes.
5 Press W/HI on the remote
repeatedly to set the hour.
6
Press ENTER on the remote.
The minute indication flashes.
7 Press W/HI on the remote
repeatedly to set the minute.
8
Press ENTER on the remote.
The clock will begin operating.
To reset the system clock
Start over from step 1
7