Advertisement
FIGURE 3
ASSEMBLY FOR SMALL HANDLE BAR
Step 1. Assembly the small handle bar(E) with bracket(L5), washers(L4), spring washers(L3)
and screws(L2).
Step 2. Slide the hand pulse sensors(E5) through the hole of support tube(F) and getting out
from the top of the support tube.
FIGURE 4
ASSEMBLY FOR COMPUTER
Step 1. Connect the sensor wires(F2 & E5) with the computer(G).
Step 2. Attach the computer on the top of the support tube and then, push the computer downward
as direstion 2.
- 4 -
Advertisement
