FIGURE 1
ASSEMBLY FOR FRONT FOOT & REAR FOOT
Step 1. Assemble the front foot(C) with the base frame(A) by using the bolts(C3), washers(C4),
spring washers(C5) and nuts(C6).
Step 2. Assembly the rear foot(D) with the base frame(A) by using the bolts(D3), washer(D4),
spring washers(D5) and nuts(D6).
** After completing firure1, if the floor / equipment is not even, turn the adjustable-end cap(D2)
to the desired level in order to balance the frame.
- 2 -