Rs-232C Command Table - Sharp PN-85TH1 Operation Manual

RS-232C command table

How to read the command table
Command: Command field (See page 45.)
Direction: W When the "Parameter" is set in the parameter field (see page 45), the command functions as described
under "Control/Response Contents".
R The returned value indicated under "Reply" can be obtained by setting "????", "
(repeater control) in the parameter field. (See page 45.)
Parameter: Parameter field (See page 45.)
Reply: Response (Returned value)
* : When POWER SAVE MODE is set to OFF:
"●/○" : I ndicates a command which can be used in standby mode or when the power is on.
"–"
When POWER SAVE MODE is set to ON:
"●" : I ndicates a command which can be used in standby mode or when the power is on.
"○/–" : Indicates a command which can be used when the power is on. Cannot be used in standby mode.
Power control/Input mode selection
Function
Power control
Input mode selection
SCREEN menu
Function
AUTO
CLOCK
PHASE
POSITIONING POSITION OF THE LONGEST
DIRECTION
POSITION OF THE SHORTEST
DIRECTION
RESOLUTION LONGEST DIRECTION
SETTING RESOLUTION
SHORTEST DIRECTION
RESOLUTION
INPUT SIGNAL (D-SUB)
Check the resolution
RESET
Controlling the Monitor with a computer (RS-232C)
: Indicates a command which can be used when the power is on. Cannot be used in standby mode.
Command Direction Parameter
POWR W
R
INPS W
R
Command Direction Parameter
ASNC W
CLCK WR
PHSE WR
HPOS WR
VPOS WR
HRES WR 300-1920
VRES WR 300-1200
PXSL WR
PXCK R
ARST W
Reply
0 Switches to standby mode.
1 Returns from standby mode.
0 Standby mode
1 Normal mode
2 Input signal waiting mode
0 Toggle change for input mode.
2 D-SUB
10 HDMI1
13 HDMI2
14 DisplayPort
21 OPTION
"ERR" when nothing is attached in the expansion slot.
24 APPLICATION
2 D-SUB
10 HDMI1
13 HDMI2
14 DisplayPort
21 OPTION
24 APPLICATION
Reply
1 When the input mode is D-SUB.
0-1200 0-1200 When the input mode is D-SUB.
Varies depending on the signal.
0-63 0-63 When the input mode is D-SUB.
0-800 0-800 When the input mode is D-SUB.
Varies depending on the signal.
0-200 0-200 When the input mode is D-SUB.
Varies depending on the signal.
300-1920 When the input mode is D-SUB.
Only even numbers are valid for parameters.
Varies depending on the signal.
300-1200
1 1 768) 1360 x 768
2 2 768) 1280 x 768
3 3 768) 1024 x 768
5 5 480) 848 x 480
6 6 480) 640 x 480
7 7 1050) 1680 x 1050
8 8 1050) 1400 x 1050
9 9 768) AUTO
10 10 480) AUTO
- Returns current resolution in the form of hhh, vvv.
1
?" or "???+"
Control/Response contents
Control/Response contents
*
●
*
-
47
E