Sharp PN-85TH1 Operation Manual page 52

Controlling the Monitor with a computer (RS-232C)
Initialization/Functional Restriction Setting (FUNCTION) menu
Function
ALL RESET
ADJUSTMENT LOCK
ADJUSTMENT LOCK TARGET
OSD DISPLAY
LED
TEMPERATURE ALERT
STATUS ALERT
POWER BUTTON
EXTERNAL CONTROLLER INPUT
SIGNAL RESPONSE LEVEL
APPLICATION
APPLICATION RECOVERY MODE
Others
Function
SIZE (Screen size selection)
INFORMATION Model
Serial no.
Temperature sensor
Temperature acquisition
Cause of last standby mode
Touch operation valid/invalid
FREEZE
52
E
Command Direction Parameter
RSET W 0-1
ALCK WR 0
W 1-2
R
ALTG WR 0-2
LOSD WR 0-2
OFLD WR 0-1
TALT WR 0-2
SALT WR 0-2
PBTN WR 0-1
PCIP WR 0-3
HDUC WR 1-200
APST WR 0-1
APRV W 0
Command Direction Parameter
WIDE WR 1-4
INF1 R
SRNO R
DSTA R
ERRT R
STCA W 0
R
TPEN WR 0-1
FRMD WR 0-1
Reply Control/Response contents
0: ALL RESET 1, 1: ALL RESET 2
0 OFF
1: ON 1, 2: ON 2
1-2 1: ON 1, 2: ON 2
0-2 0: REMOTE CONTROL, 1: MONITOR BUTTONS, 2: BOTH
0-2 0: ON 1, 1: OFF, 2: ON 2
0-1 0: ON, 1: OFF
0-2 0: OFF, 1: OSD & LED, 2: LED
0-2 0: OFF, 1: OSD & LED, 2: LED
0-1 0: MONITOR, 1: EXT. CONTROLLER
0-3 0: D-SUB, 1: DisplayPort, 2: HDMI1, 3: HDMI2
"ERR" when MONITOR is selected for POWER BUTTON.
1-200
0-1 0: DISABLE, 1: ENABLE
Display the menu for APPLICATION mode recovery
Reply Control/Response contents
1-4 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM
Value
Value
0 Internal temperature normal
1 Internal temperature abnormal has occurred and the monitor is in standby
mode
2 Internal temperature abnormal occurred (To delete the information of
temperature abnormal, turn off the main power.)
3 Internal temperature abnormal has occurred and backlight brightness is
dimmed
4 Temperature sensor abnormal
Value Returns the temperature at the temperature sensors.
Indicates a temperature sensor abnormality when "126" is returned.
Initialization
0 No detectable error has occurred
1 Standby mode by POWER button or MONITOR OFF button
2 Main power off by the main power switch
3 Standby mode by control via RS-232C, LAN, or application
4 Input signal waiting mode by No Signal
6 Standby mode by abnormal temperature
8 Standby mode by SCHEDULE setting
10 Standby mode by HDMI CEC
20 Standby mode by OFF IF NO OPERATION setting
0-1 0: Invalid, 1: Valid
"ERR" when TOUCH INPUT SELECT is set to invalid or the touch panel is not
connected.
0-1 0: FREEZE release, 1: FREEZE execute
*
-
●
○
●
○
-
*
○
●
○
●
-