Troy-Bilt 644H-Bronco Operator's Manual page 5

Decals
For your safety and the safety of others,
various safety and operational decals are
located on your unit (see Figure 1 below).
Starting Stabilization
Message on engine
Figure 1: Location of Safety and Operating Decals (Model 644H shown).
Operating Symbols
Various symbols (shown here, with word
descriptions) are used on the tiller and engine
(your unit may not have all of the symbols).
FAST SLOW
• READ THE OWNER'S MANUAL.
• KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
• KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
• NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
• SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UNCLOG-
• KEEP BYSTANDERS AWAY FROM MACHINE.
• KEEP AWAY FROM ROTATING PARTS.
• USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS YOU.
Keep the decals clean and legible at all
times. Contact your local service dealer
or the factory for replacements if any
decals are damaged or missing.
Forward Clutch Control
Operating Instruction
CHOKE
ON
STOP
TILLER DIRECTION
STOP
TO AVOID SERIOUS INJURY:
GING TINES OR MAKING REPAIRS.
Hot Surfaces
Warning on belt cover
R
REVERSE
CHOKE
ROTATING
OFF
LEVER DIRECTION
WARNING
Section 1: Safety
Refer to the separate parts catalog for
decal locations, part numbers and
ordering instructions.
Reverse Clutch Control
Operating Instruction
Warning Messages
on tine hood
TINES
BAIL
ENGAGED
BAIL
DISENGAGED
5