BenQ Home Entertainment Series User Manual page 38

User Mode Management
• Load Settings From
There is one user-definable mode if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the User) as
a starting point and customize the settings.
1. Go to Picture > Picture mode.
2. Press
3. Press
4. Press
5. Press
6. Press
Adjust
Picture
• Brightness: The higher the value, the brighter the image. Adjust this control so
(Continued)
the black areas of the image appear just as black and that detail in the dark areas is
visible.
• Contrast: The higher the value, the greater the contrast. Use this to set the peak
white level after you have previously adjusted the Brightness setting to suit your
selected input and viewing environment.
• Color: Lower setting produces less saturated colors. If the setting is too high,
colors on the image will be overpowering, which makes the image unrealistic.
• Tint: The higher the value, the more greenish the picture becomes. The lower
the value, the more reddish the picture becomes.
• Sharpness: The higher the value, the sharper the picture becomes.
Advanced
• Gamma Selection: Gamma refers to the relationship between input source and
picture brightness. Choose a preferred gamma mode from among
1.8/2.0/2.1/2.2/2.3/2.4/2.5/2.6/BenQ.
38 Navigating the Settings
/ to select User.
to highlight User Mode Management and press OK.
to select Load Settings From and press OK.
to select a picture mode that is closest to your need.
to select the sub-menu items you want to change and adjust the values
with / . The adjustments define the selected user mode.