BenQ Home Entertainment Series User Manual page 29

5. Once wireless hotspot is enabled, use the name
shown in the Hotspot Name field as the SSID
to connect to from your mobile device's
wireless menu, enable Show Password to use
the password shown in the Hotspot
Password field as the connection password.
6. If the wireless hotspot can not be found by your
device, select 2.4G under the Internet
Quality.
7. Select Security and press OK to change
security Setting.
8. Select Channel and press OK to choose the
best wireless channel.
After the wireless hotspot is setup, follow the
corresponding connection instructions described in
the previous section(s) to connect to the projector
directly and project video.
Connection 29