Advertisement
Combustor sleeve
OI Analytical recommends keeping the following tools and consumables on hand for quick and easy PFPD maintenance:
Item
Tested combustors
Large aluminum crush washers
Small aluminum crush washers
Ignitor assembly
Cap-to-body screws
Body-to-base screws
Fuse
Column nut
Combustor extraction tool
Teflon
Allen wrench
Column positioning tool
Flow adaptor
WARNING:
Do not use graphite ferrules. Only use graphite/Vespel
Teflon
and Vespel
are registered trademarks of E.I. DuPont de Nemours, Inc.
®
®
Part number 330680
Publication 41700316
Model 5383 PFPD Assembly
Flame arrestor
(286393)
Detector cap
(246900)
Detector cap
mounting screws
(295287C)
Detector body
(301333)
Detector body
mounting screws
(295295C)
(283093C)
Detector base
(301325)
Gas lines
-coated forceps
®
PMT cap
Ignitor assembly
(282624)
Combustor
(282939C, 2 mm
or 282913C, 3 mm)
Large aluminum washer
Heater cable (part number
depends on GC type)
Small aluminum crush washer
(288076)
Units
Part Number
1 or 2 each
282939C, 2 mm
282913C, 3 mm
1 pkg
288050 (pkg of 10)
1 pkg
288076 (pkg of 10)
1 each
282624
2 each
295287C
2 each
295295C
2 each
298984
1 each
223057
1 each
280719, 2 mm
280727, 3 mm
1 each
283051
1 each
284539
1 each
318949
1 each
202077
ferrules to avoid graphite pieces contaminating the detector combustor.
®
PMT signal cable
PMT housing
(286096)
PMT HV cable
(288050)
Combustor support
(280461C, 2 mm
or 280453C, 3 mm)
Advertisement
