Trailer Hitch Receiver Cover Removal (Srt Models) - If Equipped - Jeep Grand Cherokee 2020 Owner's Manual

2. Pull the bottom of the cover outward
(towards you), pull downwards to disengage
the tabs located at the top of the hitch
receiver cover.
Hitch Receiver Cover
To reinstall the hitch receiver cover after towing
repeat the procedure in reverse order.
NOTE:
Be sure to engage all tabs of the hitch receiver
cover in the bumper fascia prior to installation.
Trailer Hitch Receiver Cover Removal
(SRT Models) — If Equipped
Your vehicle may be equipped with a trailer
hitch receiver cover. This must be removed to
access the trailer hitch receiver (if equipped).
This hitch receiver cover is located at the
bottom center of the rear fascia.
1. Turn the two locking retainers located at
the bottom of the hitch receiver cover a
quarter turn counterclockwise.
NOTE:
Use a suitable tool such as a coin in the slot of
the locking retainer if needed for added
leverage.
Hitch Receiver Cover
1 — Hitch Receiver Cover
2 — Locking Retainer
2. Pull the bottom of the cover outward
(towards you).
STARTING AND OPERATING
Hitch Receiver Cover
3. Lower back down to disengage the tabs
located at the top of the hitch receiver cover
and then pull outwards to remove.
Hitch Receiver Cover Removal
263
5