Tips For Properly Aligning The Charger - Boston Scientific Vercise DB-64125 Handbook

Vercise™ DBS Charging Handbook
Note: Moving around while charging is acceptable, but be aware that the Charger must stay centered over the
Stimulator for proper charging. Excessive movement may cause the Charger and Stimulator to become
misaligned.
4 When the Charger emits a distinct double beep, press the power button to turn off the Charger and check the
Stimulator's battery with the Remote Control.
5 If the Stimulator is fully charged, remove the Charging Collar or Adhesive Patch from your body.
6 Separate the Charger from the Charging Collar or Adhesive Patch. Set aside the Charging Collar or discard the
Adhesive Patch.
7 Return the Charger to the Base Station.
Note: Do not confuse the end of charge signal (a distinct double beep) with repeated beeping indicating misalignment.

Tips for Properly Aligning the Charger

If you are having trouble properly aligning the charger or are experiencing longer than normal charging times, you can use
the following procedure to help you properly align the Charger.
1 Lightly press on your skin until you find the implanted Stimulator.
2 Press the Power Button on the Charger. The Charger will begin beeping repeatedly to signal that it is searching for
the Stimulator.
Vercise™ DBS Charging Handbook
91171709-02 Page 12 of 79