Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-1146
ZEBRA DOCK SCREEN BLANKING MOUNT
Attaching the Zebra dock screen blanking mount to the Zebra docking station:
1. Remove the new cable restraint bracket from the screen blanking assembly by
removing the (2) #6-32 x 3/8" long mounting screws that hold it in place.
2. Replace the origonal cable restraint bracket on the Zebra dock with the new
cable restraint bracket removed from the assembly in step 1. Attach using the (2)
screws that held the origonal cable restraint on the dock.
restraint bracket
#6-32 X 3/8" long
mouting screws
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2017 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
new cable
origonal cable
restraint bracket
Revision
Rev.A
Printing Spec:
new cable
restraint bracket
Form
INST-839
PS-001
Advertisement
Related Manuals for Gamber Johnson 7160-1146
Summary of Contents for Gamber Johnson 7160-1146
- Page 1 INSTALLATION INSTRUCTIONS Product Revision Form INST-839 7160-1146 Rev.A Printing Spec: PS-001 ZEBRA DOCK SCREEN BLANKING MOUNT Attaching the Zebra dock screen blanking mount to the Zebra docking station: 1. Remove the new cable restraint bracket from the screen blanking assembly by removing the (2) #6-32 x 3/8"...
- Page 2 3. Attach the accelerometer USB plug and any other peripheral cables to the docking station and cable tie in place. The USB and ethernet cables will need to cable tied in a secondary location (ie. the serial port or HDMI location) since they need to be bent and routed over to come out the opening on the bottom side.