Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-1299
NOTEPAD TOUCH - UNIVERSAL TABLET CRADLE
TM
This instruction sheet is for the NotePad Touch - Universal Tablet Cradle only. For
instructions on features, set-up, and operation of the computer, please refer to the manual
provided by tablet manufacturer.
This cradle is designed to be used with a variety of Gamber-Johnson mounting systems.
Installation instructions for other Gamber-Johnson products are provided with each individual
product.
This instruction sheet is for the following products:
Item No. 7160-1299-00 Small
Item No. 7160-1299-10 Large
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
Rev. A
Printing Spec: PS-001
Form
INST-893
1 / 6
Advertisement
Summary of Contents for Gamber Johnson NOTEPAD TOUCH 7160-1299
-
Page 1: Installation Instructions
INSTALLATION INSTRUCTIONS Product Revision Form INST-893 7160-1299 Rev. A NOTEPAD TOUCH - UNIVERSAL TABLET CRADLE Printing Spec: PS-001 This instruction sheet is for the NotePad Touch - Universal Tablet Cradle only. For instructions on features, set-up, and operation of the computer, please refer to the manual provided by tablet manufacturer. -
Page 2: Feature Identification
FEATURE IDENTIFICATION Release Button Barrel Key Lock Slam Latch Adjustment Screw 1 Adjusts Slam Latch Depth Adjustment Screw 2 Adjusts Cradle Height Adjustment Screw 3 Bottom Tabs Adjusts Cradle Arms Arms Ears VESA 75mm Mounting Pattern 1/4-20 Threads 1/4-20 x 0.500" hardware provided AMPS Mounting Pattern #10-32 Threads #10-32 x 0.500"... - Page 3 Adjustment Instructions All adjustments are done with a 9/64 allen wrench (provided) *Example Using 7160-1299-00 With a 10" Tablet* 1. Loosen 3 adjustment screws and fully extend cradle - DO NOT fully remove screws Adjustment Screws Ears 2. Rotate ears counter clockwise until the tablet can fit under them - DO NOT fully remove ears 3.
- Page 4 Adjustment Instructions 5. Place tablet in cradle and slide bottom tabs up until they contact the tablet - Remove the tablet and tighten screw 2 - Perform a fit check Bottom Tabs Slide Up Adjustment Screw 2 6. Place tablet in cradle and slide arms in until the ears contact the side of the tablet - Remove the tablet and tighten screw 3 - Perform a fit check...
- Page 5 Adjustment Instructions 8. (Optional) Thread 1/4-20 nuts onto ear bolt to lock rotation 1/4-20 Lock Nuts 9. (Optional) Rotate the lock counter clockwise to lock the cradle "Locked" Position "Un-Locked" Position 5 / 6...
-
Page 6: Operation - Docking
DOCKING AND UNDOCKING THE COMPUTER OPERATION - DOCKING Rotate Top 1. Place the tablet into the Insert Bottom First bottom of the cradle. 2. Rotate the tablet into the cradle, overcoming the resistance until the Release Button returns to the "Latched" position.