Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-0971
LEG KIT - FREIGHTLINER M2 2012+ W/ 3" RISERS
REAR 2" RISER
PASSENGER SIDE LEG
These instructions cover the installation of the leg kit into the Freightliner M2 truck (2012+) with
bucket seats. The leg kit and front support leg are installed to support a Gamber-Johnson top
plate in the vehicle. Once a top plate is installed console boxes or other accessories can
then be mounted into the vehicle.
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2017 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
TOP PLATE
BRACKET
Revision
Rev.A
Printing Spec:
FRONT 3" RISER
Form
INST-784
PS-001
DRIVER SIDE LEG
FRONT SUPPORT LEG
Advertisement
Related Manuals for Gamber Johnson Leg Kit - Freightliner M2
Summary of Contents for Gamber Johnson Leg Kit - Freightliner M2
-
Page 1: Installation Instructions
Product Revision Form 7160-0971 Rev.A INST-784 Printing Spec: PS-001 LEG KIT - FREIGHTLINER M2 2012+ W/ 3" RISERS TOP PLATE BRACKET REAR 2" RISER DRIVER SIDE LEG FRONT SUPPORT LEG PASSENGER SIDE LEG FRONT 3" RISER These instructions cover the installation of the leg kit into the Freightliner M2 truck (2012+) with bucket seats. - Page 2 •This assembly should not be positioned in the area where the airbag may be deployed. •DO NOT position the equipment in front of an airbag. Equipment positioned in front of an airbag may cause serious injury or death if an airbag is activated. •If installation of the equipment requires that the equipment be placed in front of an airbag, the airbag should be deactivated.
- Page 3 To Install: 1. Remove the inner seat bolts and loosen the outer seat bolts on both the driver and passenger seats using an M6 allen wrench. 2. Lift the seat up and slide the legs between the seats and floor. 3.