Gamber Johnson 7160-1257 Installation Instructions

INSTALLATION INSTRUCTIONS

Product
7160-1257
VERTICAL TABLET KEYBOARD MOUNT
This instruction sheet is for the Vertical Tablet Keyboard Mount only. This mount is
designed to be used with Gamber-Johnson tablet docking stations and cradles.
Attaching the Mount
1. The Tablet Keyboard Mount attaches
between the docking station or cradle and
the motion attachment using the hardware
provided with the dock or cradle.
2. The keyboard attaches using the 8-32 x 3/8"
machine screws provided in hardware bag
7120-0714.
3. The bottom mounting location on each
side of the keyboard tray is a slot which
provides up to 10 deg. of adjustment for the
tray.
Dock or
Cradle
Keyboard
Product Mounting Disclaimer Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program. and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2018 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
slotted hole
for adjustment
Revision
Rev.A
Printing Spec:
Tablet Keyboard
Mount
Gamber-Johnson
Motion Attachment
#8-32 machine
screws
Form
INST-857
PS-001