SanRex SANMIG 200MF Operator's Manual page 26

The direction of the page jumping while shifting the knob in the right
The direction of the page jumping while shifting the knob in the right
(4) The adjusting button of voltage, down slope and arc force
In the different mode of welding, this knob has different function:
(1) In the mode of MMA, it can adjust the arc force, the range is 0~10;
(2) In the mode of TIG, it can adjust the time of down slope;
(3) In the mode of MIG, it can adjust the welding voltage, the range is 10~25V.
(5) The knob of the inductance
The button is used for adjusting the output inductance，the range is 0~10，so as to make the
MAINTENANCE &TROUBLESHOOTING
24