Advertisement
ADJUST ONE-TOUCH COLOR
make fine adjustments to the image
quality on copies
Select ADJUST ONE-TOUCH COLOR
Select one of the following desired
features:
VIVID COLORS: increased color
saturation
TRANQUIL COLORS: subdued,
decreased color saturation
LIGHTEN IMAGE: decreases density,
lighter color tones
DARKEN IMAGE: increases density,
heavier color tones
HIGHLIGHT: increases exposure of areas
with low exposure
SEPIA TONE: gives the effect of old
fashioned photographs
PRINT & CHECK
Allows you to confirm scanned images on
the glass. Useful to prevent miscopying.
Select PRINT & CHECK
Continue with other settings
NEGA/POSI
inverts the original image
Select NEGA/POSI
Press OK
MERGE JOB BLOCKS – allows user to
scan originals in multiple batches from
feeder or platen glass to copy them into
one document. Each block can have
different properties
Press MERGE JOB BLOCKS
Specify copy settings for the combined
document and choose OK
Specify copy settings for the first batch of
originals and press the START key
Press NEXT BLOCK for next section
Repeat the above step for each batch of
originals
After all originals are scanned, press the
CONF/COMBINE ALL BLOCKS
Choose a sequence to print them in and
press the START PRINT
SHARPNESS
sharpen or soften the image
Select SHARPNESS
Press LOW to blur image
Press HIGH to enhance the outline
Press OK
ERASE FRAME
eliminate dark borders
Press ERASE FRAME
Choose from the following:
ORIGINAL FRAME ERASE
BOOK FRAME ERASE*
BINDING ERASE
Select erase width using [+] or[-]
Select ORIGINAL SIZE (of sheet or
book size when opened)
Press OK
REPEAT IMAGES - repeats the
original image vertically & horizontally
Select REPEAT IMAGES
Use the + and - to set number of times
to
Repeat the image vertically &
horizontally
OR
Press AUTO to center the image if
framing
Press OK
AREA DESIGNATION
enables you to specify areas to copy
or to blank out
Select AREA DESGINATION
Press PEN ENTRY
Press START SCAN
To designate a rectangular area;
mark the two opposing corners with
the pen
To designate an area with multiple
points;
mark the points, press Set Multi-
points
Press FRAMING or BLANKING
Press PREVIEW to check area
Press SHIFT to center image if
Framing
Press OK
GUTTER
adjust original margin on copy
Select GUTTER
Select margin to shift
Select FRONT or BACK side
Press + or - to set the gutter width
Press OK
SHIFT
shift image to center or a corner
Select SHIFT
Select BY POSITION
Use arrow keys to shift the image
Press OK
MIRROR IMAGE
copy the original image reversed
Select MIRROR IMAGE
Press OK
JOB DONE NOTICE
Allows you to request e-mail notification
when the current copy job is complete.
Select JOB DONE NOTICE
Select the destination for notice
Press OK
PRINT ON TAB
The side to be printed on is face up, the
first sheet of tab paper to be printed on is
placed on the top
Select PRINT ON TAB
Select the distance to push out the text
onto the tab
Press SELECT PAPER to choose paper
source
Press OK
STORE IN MAILBOX - stores the copy
job in a designated mailbox as well as
prints out a hard copy
Select STORE IN MAILBOX
Select a MAILBOX
Select DOCUMENT NAME
Use keyboard to name the document
Press OK
Advertisement
