Ventev TW-HD-RPSMACOLO Quick Start Manual

Co-Locating Mount for RPSMA Access Points
and Co-Located Ventev & Aruba Antennas
Ventev's TerraWave Co-Locating Mount is designed to simplify deployments and reduce cable loss by placing the
access point and antenna inches apart. The mount consists of a baseplate that attaches directly to the AP and allows
mounting on or above ceiling tiles, and an antenna mounting tray that articulates +/- 25 degrees for precise beam
positioning. The locking screws lock and hold the antenna mounting tray in position so the antenna's position will
not drift and will not drift over time. The mount hosts all Aruba 100, 200, and 300 series indoor access points,
Aerohive's 121, 230, 330, and 390 access points, and Samsung's 303e and 403e access points. The mount also hosts
Ventev Antennas, and several Aruba antennas, including the ANT-48 and ANT-4x4-5314 antennas.
Every Ventev Terrawave product is covered by the company's two-year TerraNet warranty program. For questions or to
purchase product, contact a Regional Sales Executive at 410-229-1201, 800-851-4965 or sales@ventev.com.
Mount With Aruba AP and TerraWave Antenna
RPSMA Co-Locating Mount without AP and antenna
www.ventevinfra.com
Model
Dimensions (inch)
Weight (lbs.)
Material
Operating Temperature Range (F°)
Compa ble TerraWave Antennas (Listed by SKU)
501621
572251
333918
544625
Compa ble Aruba Antennas (Listed by Model)
AP‐ANT‐25A
AP‐ANT‐35A
AP‐ANT‐48
sales@ventev.com
Specifications
TW-HD-RPSMACOLO
9.63" x 10.07" x 5.48"
2.2 lbs.
Powder Coated Aluminum
-4° F to +131° F
527504
500885
393218
AP‐ANT‐28
AP‐ANT‐38
AP‐ANT‐4x4‐5314
800-851-4965