Advertisement
Do not install non-original HONDA
spare parts.
How to charge
1 The charger is a 48V SLA type.
2
Open the charging input socket, plug the
connector into the charging socket. Plug the
110V power plug into electric source. Be
sure the scooter power switch is off when
charging.
3 When charging the charger indicator light is
as below
Power on
power light green, charging light green.
Charging
power light green, charging light red.
Finish
power light green, charging light red off.
Charger
power light green, charging light red
problems
flashing.
Battery
power light green, charging light red
problems
shining dimly.
Removal/installation of battery case
Remove: Put the seat up, turn
the key to "battery case open"
position and remove the battery
case.
Install: Put battery box in its
position, turn seat down and
lock.
Caution：
The SLA battery case
should be kept
upright.
Always dispose of old batteries properly.
1、Please charge in dry and ventilated
indoor condition. If in wet and/or damp
condition it could lead to charger
damage and cause fire.
2、Please don't put anything on charger
when charging or it will cause overheating.
3、Do not charge close to petrol
in order to avoid fire.
4、Using other brand charger may damage
the battery.
6、Disconnect the plug from power after
charging is finished otherwise it may damage
the charger.
7、Keep children away from battery when
charging.
Advertisement
