Peavey LN 1263 Manual page 9

LN™1263 Specifications
Channel 1-4 Input:
Channel 5 Left/Mono Input:
Channel 6 Right Input:
Mix Out:
Power/Clip LED:
Peak Power:
Frequency Response:
Max Output SPL:
Column Speaker:
Upper Column Weight:
Upper Column Dimensions:
Lower Column Weight:
Lower Column Dimensions:
Sub Speaker:
Sub/Mixer Weight:
Sub/Mixer Dimensions:
Power Input (switchable):
Peavey Electronics Corporation
9
Mic/Line/Guitar
XLR and 1/4-inch TRS
Balanced mono/stereo
-10dB 1/4-inch TRS
Balanced mono
-10dB 1/4-inch TRS
Balanced +4dBu XLR
Green/Red
1200 Watts
35-20kHz
127 dB
12 x 2.75" drivers
5.5lbs. (2.5 kgs)
4.76 x 3.75 x 18.5 inches
121 x 95.5 x 470 mm
5.5 lbs. (2.5 kgs)
4.76 x 3.75 x 18.75 inches
121 x 95.5 x 476 mm
12" woofer, 2.5" voice coil
48.4 lbs. (22 kgs)
19.7 x 13.75 x 20.24 inches
500 x 350 x 514 mm
100-120V, 50/60Hz, 300 W
220-240V, 50/60Hz, 300 W
www.peavey.com
Warranty registration and information for U.S. customers available online at
www.peavey.com/warranty
or use the QR tag below
Features and speci cations subject to change without notice.
5022 Hartley Peavey Drive
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
Meridian, MS 39305 (601) 483-5365
13 August 2005
FAX (601) 486-1278